Descripción
Power Control Unit – Ambrosini e-Racing
The brain of your racing scooter, with integrated Turbo/Boost
The Power Control Unit (PCU) by Ambrosini e-Racing is the first performance module in the world designed to introduce a true Turbo/Boost mode for open-source controllers based on VESC® technology, bringing electric racing scooter management to an entirely new level.
Disclaimer: VESC® is a registered trademark of Benjamin Vedder and the VESC® Project.
Ambrosini e-Racing is not affiliated with or endorsed by the VESC® Project.
The PCU is designed to be compatible with VESC®-based controllers only.
Developed and track-tested by national and international champion riders, the PCU was engineered to deliver instant power, exceptional reliability, and total control, even under extreme racing conditions.
Its fully waterproof housing ensures reliable operation even in the rain or on wet racing tracks, without compromising performance.
With the Turbo/Boost mode, you gain a decisive competitive advantage: instant extra power for critical overtakes, explosive starts, and final sprints where every millisecond matters.
Turbo/Boost Mode – A true racing revolution
The PCU is the only system specifically created to add a dedicated Turbo Boost feature to VESC®-compatible controllers, redefining what’s possible in competitive electric racing.
A physical Turbo button is included in the kit, connecting directly to the PCU via a dedicated waterproof connector.
The button cable can be extended to fit perfectly on your handlebar or any preferred location.
Key advantages:
Instant activation with zero delay.
Fully configurable Boost, with independent settings for each mode (Mode 1, Mode 2, Mode 3).
Selectable output: apply Turbo to both controllers or only one, depending on your setup.
Perfect for decisive overtakes, aggressive starts, and sprint finishes.
Real-time feedback for maximum precision on track.
Turbo/Boost gives you full control over when to unleash extra power and take the lead.
Full control via Ambrosini e-Racing web app
The PCU is fully managed through the official Ambrosini e-Racing web app, accessible securely via Wi-Fi from any device with a browser.
The interface is modern, intuitive, and multilingual, available in English, French, Italian, and Spanish.
Main features of the app:
Configure current and power levels for each ride mode (1, 2, 3).
Customize Turbo/Boost power independently for every mode.
Enable or disable modes for a simpler setup:
Example: use only Mode 1 + Turbo and disable the others.
Start Mode selection – choose which mode activates when the PCU powers on.
CANBUS monitoring – real-time status of connected controllers.
Automatic controller detection (single or dual setups).
Decide if Turbo applies to one or both controllers.
Change Wi-Fi password for secure access to the module.
All configurations are stored directly on the PCU, even after power-off.
Dedicated waterproof connectors
Designed for clean, safe, and water-resistant installation:
Turbo button connector, fully waterproof and pre-wired.
Extension-ready cable for perfect placement on the handlebar.
Waterproof CANBUS + power connector (5V/GND).
Advanced high-performance technology
The PCU is powered by a 32-bit high-performance microcontroller, engineered for professional racing use.
Core features:
Ultra-fast CANBUS communication with virtually zero latency.
Flawless dual controller synchronization, ideal for twin-motor setups.
Rock-solid stability, even under extreme current loads.
Integrated safety and protection systems for electronics.
Optimized racing firmware for instant, precise response.
Built-in secure Wi-Fi, with customizable password for maximum protection.
Quick and simple installation
The kit includes all necessary cables, the CANBUS/power connector, the Turbo button, and illustrated step-by-step instructions for an easy setup.
Installation steps:
Connect 5V and GND wires from your controller to the PCU using the provided connector.
Connect the CANBUS cable between the PCU and your controller(s).
Plug the Turbo button into the PCU.
Configure your setup using the Ambrosini e-Racing app and set your secure password.
You’ll be ready to race in minutes.
Key features
World’s first Turbo Boost module for VESC®-compatible controllers.
Manage single or dual controllers via CANBUS.
Up to three customizable ride modes – enable or disable modes as needed.
Independent Turbo settings for each mode (1, 2, 3).
Selectable Turbo output for one or both controllers.
Automatic controller detection for instant setup.
Physical Turbo button with waterproof connector included.
Official Ambrosini e-Racing multilingual app (EN, FR, IT, ES).
Secure Wi-Fi with custom password.
Fully waterproof housing, resistant to rain and harsh racing conditions.
Powered directly by the controller’s 5V supply, no external power needed.
Compact, rugged design built to withstand vibration and impact.
Technical specifications
Main chip: 32-bit high-performance microcontroller.
Compatibility: Controllers based on VESC® technology.
Communication: High-speed CANBUS.
Ride modes: Up to 3 + dedicated Turbo (add/remove as needed).
Turbo control: Selectable for one or both controllers.
Power supply: 5V DC provided directly by the controller.
Waterproof: Fully sealed housing for maximum protection.
Languages: English, French, Italian, Spanish.
Wi-Fi security: Customizable password.
Compact design, perfect for racing scooters with limited space.
Why choose the Ambrosini e-Racing PCU
The Ambrosini e-Racing Power Control Unit isn’t just another racing accessory – it’s a revolution in competitive e-scooter performance management.
As the first module designed to integrate Turbo Boost into VESC®-compatible controllers, it delivers instant extra power, full customization through a secure web app, and waterproof durability, all in a compact, professional-grade package.
With the Ambrosini e-Racing PCU, you can control, customize, and dominate every race.
