Spanish Champions for the Second Time: Victory with Patinet Xela and Jordi Gaya
Spanish Champions for the Second Time: 2025 Xelectrics Victory with Patinet Xela, Jordi Gaya, the Ambrosini e-Racing 100SV-EVO Motor and Power Control Unit Winning a championship is never only about speed. It's about engineering, consistency, reliability, and the ability to improve week after week. That's exactly what defined our 2025 season. In the 2025 Xelectrics Spanish Championship, Ambrosini e-Racing became Spanish Champions for the second time, winning together with Patinet Xela and our rider Jordi Gaya. This title confirms not only performance on track, but the strength of a complete racing approach: development, coaching, trackside support, and real-world testing under pressure. 2025 To win in this environment, you need: a fast package a reliable package a team that can adapt and deliver every weekend This is exactly what we built together with Patinet Xela. A true motorsport partnership with Patinet Xela Throughout the season, Ambrosini e-Racing supported Patinet Xela in every key area, following a professional motorsport workflow—from development to race execution. Our support included: Technical development and race setup for each circuit Electronics tuning and performance optimization Rider coaching and training, focused on pace, consistency, braking points, and race management Trackside service and assistance, ensuring fast interventions and maximum reliability Engineering support and continuous improvement, analyzing performance and refining the package session by session This combination—engineering + coaching + service—creates the consistency needed to win championships. Jordi Gaya: speed, control and a champion's mindset A championship-winning season needs a rider who can deliver under pressure. Jordi Gaya did exactly that: speed when needed, smart race management, clean execution, and the ability to translate technical changes into real lap-time improvements. In e-scooter racing, where traction, braking stability, and power delivery matter every lap, Jordi's professionalism and feedback were key to developing and refining the setup across the entire season. Stress-tested in real racing: Ambrosini e-Racing 100SV-EVO motor + Power Control Unit One of the most important achievements of the 2025 season was pushing our latest hardware to the limit in real competition. Throughout the championship, we tested and stress-tested: the new Ambrosini e-Racing 100SV-EVO motor the Ambrosini e-Racing Power Control Unit Racing is the toughest test bench. Heat cycles, repeated peak loads, aggressive braking, track vibration, and constant high demand quickly reveal what works—and what doesn't. Running this package for the full season allowed us to validate reliability, performance, and consistency under real championship conditions. This is exactly how racing technology should be developed: not only in the workshop, but proven on track. Two-time Spanish Champions: proof of a complete racing system Becoming Spanish Champions for the second time confirms that our method works: a complete racing system where performance is supported by engineering, data-driven decisions, rider development, and trackside execution. This title is the result of: strong collaboration with Patinet Xela championship-level riding from Jordi Gaya continuous development and real-world validation of the 100SV-EVO motor and Power Control Unit consistent work across the entire season Thank you, Patinet Achievements like this are built together, with aligned goals and the same racing mentality. And thank you to everyone who follows our work and supports the project. Every season pushes the level higher—and we're committed to raising it even more. What's next This championship is not the finish line—it's a new standard. We will continue developing high-performance e-scooter racing technology, testing under real conditions, and supporting riders and teams with professional motorsport-level engineering and track service. Ambrosini e-RacingTwo-time Spanish ChampionsTogether with Patinet by Ambrosini Jordi Gaya at Móra d'Ebre: A Victory of Heart, Strategy, and Precision Xelectrics 2025: A Weekend of Testing and Top Performance for Ambrosini e-Racing Don't miss these articles
French e-scooter champions 2025: the adventure of Team Spirit by Ambrosini
2025 French e-scooter Champions: The Adventure of Team Spirit by Ambrosini. Some seasons aren't just recounted; they're lived. They're etched into your skin like the paddock dust, the tension on the starting grid, those nights when you look at your vehicle and think, "We can still improve something." The 2025 French e-scooter Championship was exactly that: a real, tough, and exciting journey. And today, that journey has reached the ending we dreamed of: Team Spirit by Ambrosini is the 2025 French Champion in the overall standings, with the full support of Ambrosini e-Racing in technical, managerial, logistical, and organizational aspects. France 2025: Kilometers, Battles, and Podiums Earned Through Hard Work. In a competitive championship, the winner isn't the one who "goes fast one day." The winner is the one who arrives prepared every weekend, the one who controls the details when everything is fast, the one who turns chaos into method. We did it this way: with our heads, with discipline, and with hunger. We fought race after race, consistently climbed onto the podium, and turned that consistency into the greatest result: 2025 French Champions. Two riders, the same merit: Jordi Gaya and Aymard Vernay. This title has two names. Two protagonists. Two ways of being fast. But the same weight within the team. Jordi Gaya: runner-up in the riders' championship and a key player in the overall title. Jordi Gaya had a season with a racing mentality: cool when necessary, aggressive when possible, and always intelligent. In 2025, he finished the championship as runner-up in the riders' standings, scoring crucial points that helped Team Spirit by Ambrosini win the overall title. And there's another story within the story: Jordi is also Spain. He was the 2024 Spanish National Champion, and in 2025 we won the national title again in Spain, adding a second Spanish Championship title to our project. Yes, we'll publish a dedicated article on the blog to tell the story properly. Aymard Vernay: world-class speed and composure in decisive moments. Alongside him, Aymard Vernay. When the race is decided by details, when the pressure mounts, when the margin is minimal… that's where you see the level of an international rider. Aymard is the reigning eSkootr Championship (ESC) world champion, and in 2025 he brought that world-class mentality to the French championship, which is evident in everything: pace, race awareness, decisiveness, and consistency. To follow the world championship and official news: Official ESC World Championship info. We are waiting for the official dates of the next world championship: as soon as they are published, we will inform you. Ambrosini e-Racing: The Invisible Work That Makes a Winner. A title isn't born on the track alone. It's born before. It's born behind the scenes. Ambrosini e-Racing followed Team Spirit by Ambrosini to the 100%: managerial management, technical support and development, logistical organization, and complete operational coordination for each weekend. When the process is professional, the driver can attack with confidence. And when everything comes together… the result arrives. Vehicles Built to Win: Power, Stability, and Control. Yes, our e-scooters are powerful. But in racing, power without control is useless. In 2025, we competed with vehicles built to be stable, predictable, and easy to push to the limit, developed after days, weeks, and months of testing. That's the real difference: that the driver feels the vehicle is "with them" when everything is on the line. Paris: Final Awards Ceremony (Sunday, December 21, 2025). There are victories that are precious when they arrive. But they become unforgettable when they are celebrated. On Sunday, December 21, 2025, we will be in Paris for the final ceremony. A moment that represents much more than a trophy: it represents an entire season turned into history. Thank you: Federation Moto de France, timeforacing, and our sponsors. Thanks to those who make this championship possible and drive the growth of this sport: Federation Moto de France — Official Website Federation Moto de France timeforacing — Official Website timeforacing And a huge thank you also to our sponsors, a fundamental part of this journey: Ecolito — Official Website Ecolito Dualtron / Minimotors — Official Website Minimotors Motosprint also featured us (Serena Zunino). Another huge satisfaction: an article dedicated to our 2025 season was published in Motosprint, written by Serena Zunino (a journalist who covers MotoGP). A clear sign that this project and these results are making their mark. Read the article on Motosprint: Read article on Motosprint Eleonora Fumagalli Writer & Blogger French e-scooter Champions 2025: The Adventure of Team Spirit by Ambrosini Jordi Gaya at Móra d'Ebre: A Victory of Heart, Strategy, and Precision Xelectrics 2025: A Weekend of Testing and Top Performance for Ambrosini e-Racing Team Spirit: A New Era in European E-Racing Begins Don't miss these articles
Step 2: The Importance of Optimizing the Frame for a Competition E-Scooter
COMPETITION SCOOTER: STEP N.2 – STEERING AXLE REPLACEMENT FOR SUPERIOR RELIABILITY In the world of electric scooter competitions, every single component can make a difference. Ambrosini e-Racing is committed to ensuring that our vehicles are built to withstand the toughest challenges on the track. The second step to perfecting your competitive e-scooter is replacing the steering axle, a key part for safety, precision, and durability during races. Why is it essential to replace the steering axle? The steering axle is a crucial component for the scooter's steering system. If it is not designed correctly or has reliability issues, it can compromise the riding experience, especially during high-speed conditions. The original Nami aluminum axle has been found to be unreliable, with the risk of breaking during rides, leading to dangerous situations for riders. Our reinforced steel axle: the right choice Our reinforced high-quality steel steering axle has been developed to offer better resistance and durability compared to the original axle. The new version of the Nami axle, although reinforced, features only one locking nut, which prevents the ability to properly adjust the steering cone bearings. This reduces the ability to perfectly adjust the geometry of the steering, negatively affecting maneuverability and stability. Our design, however, includes two locking nuts, which allow for optimal adjustment of the cone bearings, ensuring smooth, precise, and safe handling. Benefits for Motorsports 1. Increased Rigidity and Stability The reinforced steel axle not only withstands more wear but also offers greater rigidity, which is essential for maintaining stable and precise steering under race conditions. 2. Optimized Steering Geometry With the correct adjustment of the cone bearings, we can optimize geometry, allowing for better maneuverability and ultimate control even at high speeds. 3. Durability and Resistance to High Stresses Electric scooter racing demands components that can withstand extreme stress. Our steel axle is designed to handle these conditions, ensuring long-lasting performance and superior durability. 4. Superior Performance in Races A smoother ride, with no play, and improved steering responsiveness can make a crucial difference in competitive racing. Our solution ensures the best performance in any racing environment. 5. Enhanced Safety for Riders The additional resistance of our axle and the ability to properly adjust the bearings ensure better control and safety. During races, having a stable and responsive steering system is crucial to preventing accidents or malfunctions that may compromise rider safety. Important Assembly Notes To ensure optimal performance and long-lasting durability of the steering system, follow these key assembly tips: Replace the bearings: Use bearings of the same size but of high quality, such as SKF bearings. This is essential for ensuring smooth rotation and reducing wear. Lubrication: Grease the bearings thoroughly with high-quality grease. Proper lubrication is key to ensuring low friction and preventing premature wear of the components. Proper bearing adjustment: Perform a perfect adjustment of the bearings. Make sure that the bearings are correctly positioned, with no play or excessive friction, as even small errors can affect overall performance. Nut tightening: When tightening the nuts, add medium-strength thread locker to prevent loosening during use. This ensures that the system remains stable even under extreme stress. Conclusion Investing in the right steering axle is crucial to getting the most out of a competitive e-scooter. Our reinforced steel axle, with two locking nuts, solves the issues of the original Nami version, allowing for optimal adjustment of the cone bearings. Not only does it improve maneuverability and stability, but it also increases the overall durability and performance of the scooter, enhancing race-time performance. 🚀 What's next? Get your racing machine ready with the next upgrade! 🔗 Ambrosini Reinforced Steering Axle: Link Eleonora Fumagalli Writer & Blogger Step 2: The Importance of Optimizing the Frame for a Competition E-Scooter Copia Step 1: The Importance of Optimizing the Frame for a Competition E-Scooter Preparing a Competitive E-Scooter: The Experience of Ambrosini e-Racing 2025 France E'TROTT RACING FFM Championship Calendar: Dates, Locations & Exciting News! Don't miss these articles
Step 1: The Importance of Optimizing the Frame for a Competition E-Scooter
Competitive E-Scooter Preparation Step by Step: A Guide to Modifications and Innovations by Ambrosini e-Racing When preparing a competitive e-scooter (or e-scooter racing), the temptation to boost power immediately is strong. However, it's crucial to understand that the best approach starts with the stability and efficiency of the vehicle, not just sheer power. The first essential step in preparing an e-scooter racing is optimizing the foundation: the frame and structural components. In particular, the steering column and handlebar must be the starting points. Why Start with the Frame? When working on a competitive e-scooter or e-scooter racing, the stability and rigidity of the frame are essential. An optimized frame provides the foundation for a scooter that responds quickly to commands without sacrificing safety or control, especially during crucial race moments. In our development process, one key aspect has been the elimination of unnecessary points of flexibility. A scooter with too many added components risks having more play and more wear. The philosophy of Ambrosini e-Racing starts right here: "less is more." Steering Column and Handlebar: The First Key Modification A crucial aspect when preparing a competitive e-scooter is the steering components. The steering column and the handlebar are among the most important elements to optimize. An imprecise steering system or lack of rigidity severely impacts performance on the track. 🔧 The modification we recommend for this first step involves the steering column and the handlebar. Too many assembled parts, screws, and unnecessary joints are not the right approach for a race e-scooter. It should not become a “Lego” with multiple elements and an excessive number of screws because each additional part can be a potential point of failure. Instead, the aim is to create a monolithic structure to reduce any possible mechanical play and increase overall rigidity. The Key Modification: Aluminum Steering Column with Carbon Handlebar After testing various materials like carbon, aluminum, and titanium, we developed a final kit combining the aluminum steering column and carbon handlebar, designed to maximize rigidity and lightness. This kit is designed to perfectly respond to race conditions and deliver excellent performance in every situation. A decisive element of this modification is the simplified structure: the kit features just two mounting points. This eliminates the need for additional joints and unnecessary fastenings, reducing the number of screws and superfluous components. Each part of the kit is designed to ensure maximum stability and reliability while riding, without compromising lightness. Therefore, there is no need for a structure similar to a "Lego," where each part is separated by screws and redundant components. Another important consideration is the overall weight of the kit, specifically engineered to improve front-end stability and traction of the scooter. The combination of aluminum and carbon offers the ideal balance between rigidity and lightness, enhancing the scooter's overall performance during races. Finally, the two mounting points must be secured using high-resistance screws, designed to withstand the mechanical stress on the track. We recommend grade 10.9 screws for optimal strength. Purchase our aluminum steering column and carbon handlebar kit: 🔗 Ambrosini e-Carreras Steering Column🔗 Aerodynamic Carbon Handlebar Choosing the Right Steering Column Height The choice of steering column height is crucial to ensure the pilot adopts the ideal position during competitions. This choice depends on the pilot's height and riding style. For example, a rider who prefers a more aggressive approach might need a lower steering column, while a rider looking for more comfort might opt for a taller one. If you have any doubts about the correct steering column height for your riding style, feel free to contact us. We'll help you choose the perfect height for optimal performance and maximum safety. Ambrosini e-Racing's "Less is More" Philosophy Unlike a "Lego" assembly, where each part is added without a real need, a competitive e-scooter requires a careful selection of components. Every single element must have a specific function and contribute to improving overall performance, without complicating the structure unnecessarily. Ambrosini e-Racing has won many races applying this preparation philosophy, even against e-scooters with powers up to three times higher. For instance, at the Spanish Championship stage in Murcia, Javi Espinosa, our coach and current pilot in the Eskootr Championship (ESC), overcame more powerful e-scooters with stability issues. Similarly, Jordi Gaya, Spanish Xelectrics National Champion 2024, earned several podiums, defeating more powerful e-scooters with less stable frames and steering systems. «Power Without Control Is Counterproductive» We've proven that a well-optimized e-scooter racing, with a solid and stable frame, can beat scooters with greater power but poor stability. As the famous saying goes, "power without control is counterproductive," and Ambrosini e-Racing has made this philosophy its banner. Next Steps and Future Developments In the next article, we will dive into the second key modification to take your competitive e-scooter to a new level of performance. If you found this first step interesting, don't miss our next post! Eleonora Fumagalli Writer & Blogger Step 1: The Importance of Optimizing the Frame for a Competition E-Scooter Preparing a Competitive E-Scooter: The Experience of Ambrosini e-Racing 2025 France E'TROTT RACING FFM Championship Calendar: Dates, Locations & Exciting News ! Black Friday 2024: Best Deals on E-Scooters and Racing Components at Ambrosini Racing! Don't miss these articles